![\"Where](\"https:\/\/decideoutside.com\/wp-content\/uploads\/2020\/10\/Where-to-Tie-an-Anchor-on-a-Pontoon-Boat.jpg\")
<\/picture><\/figure><\/div>\n\n\nHow to Install an Anchor Successfully to Your Pontoon Boat<\/h2>\n\n\n\n
Before thinking about where to tie your anchor, you need to think about the type of anchor you’re using on your boat. You can either use a manual anchor or an electric pontoon anchor winch to keep your boat stable.<\/p>\n\n\n\n
There are different types of anchors that work for various locations. Choosing the right anchor will make your job easier and more efficient.<\/p>\n\n\n\n
- Box anchors work better in muddy ground or light vegetation. If you\u2019re using your pontoon boat in a lake or a river, a box anchor<\/a> will work best to keep your boat stable. This anchor works better because it maximizes the surface that gets in contact with the ground. However, you need to make sure that there\u2019s enough line to provide a good grip; otherwise, your boat will keep on drifting. The recommended length is to allow for a 5:1 scope, which is the distance between the bottom of the boat<\/a> to the water.<\/li>
- Fluke anchors are more suitable for gravel and sand. You can use a fluke anchor<\/a> if you\u2019re taking your boat on the sea or ocean. In this case, the anchor’s weight isn\u2019t the most important factor, as the anchor features arms that dig into the ground to keep your boat in place.<\/li>
- Grapnel anchors work if you\u2019re trying to stabilize your pontoon boat<\/a> in rocky conditions. Luckily, you can find several models of this anchor on the market. Rocky bottoms are more challenging than sand and mud, and this is why you need to make sure that you\u2019ve picked the right grapnel anchor<\/a>.<\/li><\/ul>\n\n\n\n
<\/a>
\n\n\n\n
How to Anchor a Pontoon Boat<\/h2>\n\n\n\n
A pontoon boat moves a lot, and you need be able to secure it correctly. This will keep the boat from drifting.<\/p>\n\n\n
\n![\"\"](\"https:\/\/decideoutside.com\/wp-content\/uploads\/2020\/09\/pontoon-boat.jpg\")
<\/picture><\/figure><\/div>\n\n\n1. Position the Boat<\/h3>\n\n\n\n
A good day to practice anchoring is a day without much wind. Ideally, you should try to anchor your boat away from rocks or the banks of the river; however, this might not always be the case. Keep the nose of the boat in the face of the strongest current or wind before trying to anchor it.<\/p>\n\n\n\n
2. Calculate the Depth of the Water<\/h3>\n\n\n\n
The depth of the water can be calculated using a depth finder<\/a> (Amazon). You will use this number as a guide to calculate the amount of line needed. <\/p>\n\n\n\n
<\/a>
\n\n\n\n
3. Anchor Your Boat<\/h3>\n\n\n\n
Turn off the engine and make sure that the pontoon boat is as still as possible.<\/p>\n\n\n\n
4. Drop the Anchor<\/h3>\n\n\n\n
Dropping the anchor in the water is the most crucial step because you need to be careful. Otherwise, the line can get tangled; a tangled line can cause many safety problems.<\/p>\n\n\n\n
You should also avoid throwing or hurling it overboard, like the movies. This will affect the way the anchor lays on the ground, and it won\u2019t be secure. The line should be at least 5 or 7 times the depth of the water, and you need to lower the anchor slowly.<\/p>\n\n\n\n
5. Pull the Anchor<\/h3>\n\n\n\n
Wait for a little while after the anchor hits the ground. The power of the wind or current will try to move the boat, and you will be able to see if the anchor is actually keeping the boat in place.<\/p>\n\n\n\n
After the anchor hits the ground, pull it in towards the boat. This will cause the anchor to grab into the ground and secure your pontoon boat in place. Tug on the rope several times to make sure that the anchor has been adequately secured.<\/p>\n\n\n\n
6. Tie the Anchor<\/h3>\n\n\n\n
Now it\u2019s time to attach your anchor to the pontoon boat’s body to keep it in the same place, whether you\u2019re planning to go swimming<\/a>, fishing, or wish to spend the night on the pontoon boat. Make sure that the anchor is secured tightly to the cleat. There are lots of nautical knots<\/a> that you can practice to make sure that the line is properly secured before dropping the anchor.<\/p>\n\n\n\n
- Fluke anchors are more suitable for gravel and sand. You can use a fluke anchor<\/a> if you\u2019re taking your boat on the sea or ocean. In this case, the anchor’s weight isn\u2019t the most important factor, as the anchor features arms that dig into the ground to keep your boat in place.<\/li>